Neptune E-CODER User Manual

E-CODER
®
Quick
Install Guide

Neptune E-CODER Specifications

General

Output	Digital
Power Source	Battery or external power
Operating Temperature	-20°C to 60°C (-4°F to 140°F)
Power Supply	3.6V Lithium Battery
Dimensions	Varies depending on model
Weight	Varies depending on model

Summary

1: General Instructions

2: Product Description

3: Wiring the Inside Set Version

4: Wiring the Pit Set Version

5: Installing Networked Receptacle / Dual Port MIUs

Programming the HI Register

Steps to program the HI register using the Neptune field programmer.

Programming the LO Register

Steps to program the LO register using the Neptune field programmer.

6: Wiring Networked Registers

7: Crimping Tool Manufacturers

8: Activating the E-CODER®

9: Reading the E-CODER®

10: How to Tell if Water is in Use

What To Do In Case of a Leak

Checklist for identifying and addressing potential water leaks.

11: Contact Information

By Phone

Contacting Neptune Customer Support via telephone.

By Email

Contacting Neptune Customer Support via email.