7: Crimping Tool Manufacturers
To apply the Scotchlok™ connectors, you need a
proper crimping tool. The following table shows a list
of various manufacturers and model numbers.
To reduce fatigue, use a tool within each
splicing group with the highest
mechanical advantage indicated within
the parentheses ( ).
Manufacturer Model Number
3M l E-9R (10:1)
l E-9BM (10:1)
l E-9C/CW (7:1)
l E-9E (4:1) E-9Y (3:1)
Eclipse Tools 100-008
Use of normal pliers or channel locks is
highly discouraged because they do not
apply even pressure and can result in an
improper connection.
- 14 -
To Next Page
Loading...
