Neptune Suffolk - Cabinet Installation; Base Cabinets

2
1. Suolk Kitchen Concept
The Suolk Kitchen is designed to combine the benets of a modular kitchen with the look and feel of an individually sized and
crafted bespoke kitchen. The concept allows individual cabinets to be precisely levelled and joined giving a straightforward
installation. The skirting and cornice detailing allows a seamless built-in look to be achieved.
1. Before you begin the oor surface should be fully nished. This is the most reliable way of achieving a good t.
2. Level cabinets & set height to 890mm from the oor at the lowest point in the room. (see Levelling, page 6)
3. The front face of the cabinet should be 600mm from the wall in most installations. (There is a void behind cabinets to
allow for services and 560 - 600mm tting.) This distance may change depending on pipework or the worktop depth
that will be tted. A good method of doing this is to mark a line where the front face of the cabinets should be, and
then working to that Datum.
600mm
600mm
4. Decide on whether any cabinets will be oset. (see Osetting, page 5)
5. Join neighbouring cabinets together using the supplied ttings. (see Attachment, page 7)
6. Attach cabinets to wall using the supplied brackets and suitable wall xings. (see Diagram 2)
7. Fit Base End Panels at the end of run where the carcase can be seen. (see Base Panels, page 4)
2. Cabinet Installation
Base Cabinets
t : +44 (0) 1793 427300 f : +44 (0) 1793 427399 e : info@neptune.com
www.neptune.com
Diagram 1.
Diagram 2.