9
t : +44 (0) 1793 427300 f : +44 (0) 1793 427399 e : info@neptune.com
www.neptune.com
This cabinet is designed to hold appliances in 3 dierent congurations:
1. 600 Single Oven & 450 Compact appliance (including coee machine)
above.
2. Single warming drawer & Double oven above.
3. 600 Single Oven & Microwave above.
In order to use the same cabinet for dierent congurations the shelves are
interchangeable.
An extra baton is attached to one of the shelves. This is to allow for a slightly
dierent sized appliance. The extra baton can be planed to the correct size if
required giving an adjustment of + 10 or - 20mm from the standard aperture
height.
1050 Full Height Appliance Cabinet
This cabinet is designed to hold appliances in 2 dierent congurations:
1. 600 Single Oven.
2. Single warming drawer & 450 Compact appliance.
An extra baton is attached to the top shelf. This is to allow for a slightly
dierent sized appliance. The extra baton can be planed to the correct size if
required giving an adjustment of + 10 or - 20mm from the standard aperture
height.
600 Full Height Appliance Cabinet
We recommend that under-counter appliances(washing machine, dishwasher, fridges, freezers) are tted mid-run in
accordance with manufacturer’s instructions. Fitting at the end of a run is possible, but will require some extra support which
will need to be constructed by the kitchen tter. Often an Island foot is used at the end of a kitchen run next to an appliance to
increase stability. Speak to your Neptune kitchen designer for advice on possible options.
Under-counter appliances
1. 2.
1. 2.
Diagram 14.
Diagram 15.
3.
9