Check if there is water in the water tank.
If not, rell and press “Start” button again.
EN
HK
AR
TW
EN
HK
AR
TW
檢查水箱是否有水。如果没有,則再裝滿並再次
按「開啟」按鈕。
檢查儲水箱中是否有水,如果沒有,將飲用水注
入後,再次按下啟動鍵 。
If no liquid comes out even if there is enough water in the water
tank, proceed as described on the following two pages.
如果水箱中有足夠的水,亦無液體流出,則遵循以下兩頁
的步驟進行處理。
如果儲水箱有足夠水量,液體仍沒有正常流出,請參閱後
面兩頁的說明。