RINSING
10
5
DANGER: HOT WATER INJURY
NOTE:
Every time you carry out a rinse, take the opportunity to empty the drip tray.
MORNING, AFTERNOON, EVENING (3x / DAY)
Semi automatic rinse process.
FOR THE MIXING UNIT
FTP 30 E & FTP 60 E
1. Place a bucket (minimum 0.5 litre) on the drip
tray to collect the rinsing water.
2. In FTP 30 E & FTP 60 E push and hold buttons 3 and 12
simultaneously for a few seconds.
In FTS 30 E & FTS 60 E press three times at the top left
of the touch screen and then press “Rinsing”
3. The automatic rinse process will start by
rinsing coffee brewer, then mixing bowl 1, then mixing
bowl 2... (check display).
4. When complete, discard the dirty water.
FTS 30 E & FTS 60 E
To Next Page
Loading...
