4
DISPENSING A DRINK
9
DANGER: HOT WATER INJURY
NOTE:
. Beverage quality will be increased by use of the espresso cup stand. Where cup size permits,
always use the espresso cup stand. This machine should only be used with potable or bottled water to
ensure consistency and beverage quality.
NOTE:
. Never remove the cup or place your hands in the dispensing area during preparation!
NOTE:
. For advice on best practices for water safety/quality and hardness, please refer to the Nestlé
Professional Water Management Tool. http://www.watermanagementtool.com
1. Place a cup exactly in the centre of
the grid or on the espresso cup stand for
espresso.
2. Select a drink by pushing a selection
button.
3. The desired selection button will remain
ON and all other buttons will switch OFF.
4. The dispensing area will be illuminated by
a flashing light and the display will show the
name of your chosen drink. When dispensing
has finished all selection buttons will light up
and the dispense area light will remain ON.
5. When the display shows ‘remove cup
please’, remove the cup and enjoy your
drink.
To Next Page
Loading...
