Need help?Do you have a question about the Netafim Arkal 2” Spin-Klin Compact Stand Alone Filter and is the answer not in the manual?
General| Brand | Netafim |
|---|---|
| Model | Arkal 2” Spin-Klin Compact Stand Alone Filter |
| Category | Water Filtration Systems |
| Language | English |
Provides an overview of the filter's ease of use, minimal skill requirement, and operational scope.
Emphasizes reading instructions, conventional safety, non-hazardous liquids, and avoiding explosive atmospheres.
Covers safe installation practices including clearance, lighting, platforms, and qualified personnel.
Specifies safe handling, lifting, and positioning using approved equipment and authorized personnel.
Details requirements for electrical wiring, grounding, and lockable power cut-off switches.
Covers air supply, cut-off switches with pressure release, and pressure regulation for pneumatic components.
Addresses safety for hot water applications, manual cut-off valves, pressure release, and reduction.
Outlines requirements for qualified technicians, site work, lifting safety, and flooring for drainage.
Stresses following commissioning and start-up instructions by authorized technicians for optimal performance.
Advises reading instructions, observing safety stickers, and using the filter only for its intended purpose.
Lists crucial steps before maintenance, including power disconnection, pressure release, and warning signs.
Reminds to check for pressure before opening the filter lock to ensure safety.
Explains the disc filtration process, groove design, and unique in-depth filtration mechanism.
Describes the Spin Klin spine assembly and the automatic back-flush operation mechanism.
Illustrates and explains inlet and outlet valve operations during filtration and back-flush modes.
Details the filtration process and the back-flush process steps, including valve actions.
Lists technical parameters like pressure, flow rate, and a chart showing head loss vs. flow rate.
Provides step-by-step instructions for installing the filter unit, including connections and checks.
Guides on controller installation, power supply, and setting back-flush parameters as it's not included.
Details the procedure for starting up the filter, including valve operation, leak checks, and back-flush verification.
Outlines the steps for maintaining the bypass filter, including removing and cleaning the internal screen element.
Covers routine checks for pressure differentials, leakages, controller performance, and cleaning the command filter.
Provides instructions for protecting the filter from freezing damage by draining water and leaving the drain valve open.
Details the step-by-step process for manually cleaning the filter discs, including removal and reassembly.
Explains common deposits and provides a procedure for cleaning organic and biological deposits using sodium hypochlorite.
Offers specific instructions for cleaning carbonate and iron deposits using hydrochloric acid.
Describes a testing procedure for unknown deposits and a two-step cleaning process if neither solution works alone.
A flowchart to diagnose and resolve issues when the filter does not perform backwash.
A flowchart to diagnose and resolve issues related to continuous or non-stop backwashing.
To Next Page
