NMC-DC
INSTALLATION MANUAL
Page: of 109 pagesRevision: 01 IDoc. Name: NMC-DC I Installation Manual
Crop Management Technologies
2. "No Flow” Alarm
If a “No Flow” alarm appears
go through the following
steps to identify the problem.
All RELAY cards installed are present
8. Install
1 2
6. Hardware Checklist
If one of the RELAY cards is not present, go to
Appendix C – Replacement and Additional Installations.
Follow the steps for replacing the appropriate Relay Latch card.
D. In (Digital Input Card) is present
If Digital Input card is not present, go to
Appendix C – Replacement and Additional Installations.
Follow the steps for replacing the Digital Input card.
Option A – Relay Card Malfunction Option B – Digital Input Card Malfunction
79
To Next Page
Loading...