Need help?Do you have a question about the Netafim TECHLINE AS and is the answer not in the manual?
General| Emitter Type | Pressure Compensating (PC) |
|---|---|
| Emitter Spacing | 30, 45, 60 cm |
| Material | Polyethylene |
| Operating Pressure | 0.55 - 3.5 bar |
| Pressure Compensating Range | 0.55 - 3.5 bar |
| Anti-Siphon Mechanism | Yes |
| Clogging Resistance | High (self-flushing mechanism, labyrinth design) |
Highlights advantages of low volume drip irrigation for new plantings and water savings.
Details Techline AS™ features like anti-siphon mechanism, self-flushing, and root barrier.
Covers site survey requirements, plant grouping for hydro-zoning, and soil type identification.
Guidance on selecting the appropriate Techline AS™ product based on garden or turf and soil type.
Explains Grid and Lite layout methods for Techline AS™ installations and their common principles.
Details maximum run lengths for laterals and benefits of centre feed grid layouts.
Provides methods for calculating appropriate mainline and submain sizes based on flow rate and head loss.
Explains how to determine total zone flow and water demand using various methods.
Presents essential formulas for calculating dripperline length, application rate, and number of drippers.
Guides on calculating plant water requirements, soil infiltration, and final irrigation duration.
Details fittings, pipe stakes, filters, and pressure regulating valves required for installation.
Provides specifications for solenoid valves, filters, Techfilter, PRV, and dripperline installation.
Outlines routine system maintenance, flushing procedures, and inspection checklist requirements.
To Next Page
