Need help?Do you have a question about the Netafim NMC-DC and is the answer not in the manual?
General| Brand | Netafim |
|---|---|
| Model | NMC-DC |
| Category | Irrigation System |
| Language | English |
Steps for assembling and installing the solar panel and the main controller unit onto a pole.
Procedure for connecting the main 12VDC battery to the controller, including gland cover and terminal connections.
Guidance on routing the solar power cable and connecting it to the controller through the gland.
Diagram and explanation of the controller's input and output terminal layout for digital and analog signals.
Steps for installing solenoids, including connecting wires through glands and to the controller terminals.
Details on connecting 12V DC latch output terminals for both normally open and normally closed solenoid types.
Guidance on connecting digital and analog inputs, including specific examples like water meters and EC/pH sensors.
Procedure to perform a hardware checklist to verify system components and their configuration.
Steps to define and configure the output devices, specifying their function and type based on solenoid characteristics.
How to test the controller's output relays manually or automatically to ensure proper functionality.
Procedure for testing digital inputs, including dry tests and verifying pulses from meters or switches.
Steps to test analog inputs like temperature and humidity sensors, referencing a table for sensor value interpretation.
Verifying power supply status (solar panel, batteries) and communication link integrity.
Troubleshooting steps for power failure, including checking fuses, batteries, and switch positions.
Steps to identify and resolve 'No Flow' alarms, checking for relay card and digital input presence.
Troubleshooting guide for 'Sensor Fail' alarms, covering digital input card, dip switch settings, and sensor malfunctions.
To Next Page
