Wireless Troubleshooting Guide
These are stored settings and passwords for connecting to the listed networks. If your Wi-Fi network name/SSID is not
listed here, close this window and return to the "Network and Sharing Center".
4 Click Yes in the confirmation dialog box.
5 Click on "Change Adapter settings" on the left-hand side.
6 Right-click on "Wireless Network Connection" and select "Connect / Disconnect".
Note – If you cannot see a “Wireless Network Connection” item, your wireless adapter may not be installed or inserted correctly.
Please check this before continuing with steps in this guide.
7 You should see a network listed with the SSID you obtained at the start of this guide. Select your wireless network
and click “Connect”. Enter your Wi-Fi security key/password and click OK. You will be connected to the Wi-Fi network
(Example: NetComm 8386).
To Next Page
Loading...
