Hardware Installation
1. Screw the provided antenna to the antenna connector on the back of the router.
2. Insert your SIM card into the SIM card slot (you should hear it click into place).
3. Connect the power adapter to the power socket on the back of the router.
4. Plug the power adapter into the wall socket and power on the device.
5. Wait approximately 2 minutes for the router to start up.
6. To connect to the router via Ethernet cable, please go to step 2. To connect via Wi-Fi,
please go to step 3.
Power adapter
Power point
To Next Page
Loading...
Need help?
General
