Enter the MAC Address to be filtered and click Apply/Save to save the new MAC Address filter settings.
To delete a MAC filter entry, click the Remove checkbox next to the selected filter entry and click Remove.
Wireless Bridge
Wireless Bridge allows you to configure the router’s access point as a bridge.
Select the mode for the Wireless Access Point built into the NF8AC. You can specify which wireless networks will be allowed to
connect to the NF8AC by using the ‘Bridge Restrict’ option and then entering the applicable MAC Addresses of the other wireless
access points.
Click Apply/Save to save the new wireless bridge configuration settings.
Advanced
Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit
power and preamble settings.
Click Apply/Save to save any changes to the wireless network settings configuration.
To Next Page
Loading...
Need help?
General
