NetComm NL1901ACV - Backup And Restore Configuration Guide Manual

Backup and Restore Configuration Guide
NL1901ACV FAQs
NL1901ACV FAQs – Backup and Restore Configuration Guide
1 of 2
AA00000 v. 1.1 March 2019
© NetComm Wireless 2019
Back up your settings
This guide provides you with instructions to back up and restore your router configuration.
It is recommended to make a backup of the current working configuration in case you lose your settings or need to
perform a factory reset (i.e. reset default settings).
Login to Web User Interface
Connect a computer and the NF18ACV using an Ethernet cable. (A yellow Ethernet cable was provided with
your NL1901ACV).
1 Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address
bar and press
Enter.
http://192.168.20.1
2 E
nter the following credentials in the
User Name and Password fields:
User Name:
admin
Pa
ssword: The serial number found on the label on the back of the device
3 Click the
Login button.
Note
– If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User
Interface guide from FAQs section.