NetComm NL1901ACV - Settings Guide Manual

Restore Factory Defaults Settings Guide
NL1901ACV
NL1901ACV – Restore Factory Defaults Settings Guide
1 of 4
FQ01131 v. 1.1 March 2019
© NetComm Wireless 2019
About Factory Resets
A factory reset on the NL1901ACV returns all settings to the default settings as it was when shipped from the
factory.
Important
– It is particularly important to perform a factory reset after upgrading the NL1901ACV firmware to ensure the firmware
installation is completed correctly.
Factory Reset Methods
There are two methods that can be used to perform a successful factory reset:
Use the NL1901ACV's graphical user interface (GUI) to complete a factory reset.
Manually perform a factory reset using the reset pinhole at the back of the NL1901ACV.
This guide will explain both methods to complete a successful factory reset.