NetComm NL1901ACV Setup Guide

Wireless Security Setup Guide
NL1901ACV
NL1901ACV – Wireless Security Setup Guide
1 of 7
FQ001125 v. 1.1 March 2019
© NetComm Wireless 2019
Wireless Security Overview
To guard your home network against attack and prevent unauthorised access, it is very important that you follow
this guide to secure your network.
Changing the wireless password
Connect a computer and the NL1901ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your
NL1901ACV).
1 Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address
bar and press
Enter.
http://192.168.20.1
2 Enter the following credentials in the
User Name and Password fields:
User Name:
admin
Password: The serial number found on the label on the back of the device
3 Click the
Login button.
Note
– If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User
Interface guide from FAQs section.

NetComm NL1901ACV Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1900 Mbit/s
Product type	Tabletop router
Product color	Black
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
4G standard	LTE-TDD & LTE-FDD
4G LTE category	8
Mobile network generation	4G
Output current	2 A
Output voltage	12 V
Power source type	AC
Memory card slot(s)	-
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 95 %
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK

Weight and Dimensions

Depth	75 mm
Width	230 mm
Height	200 mm
Weight	562 g