NetComm NL1901ACV Faqs

Configure Cellular as a Backup Guide
NL1901ACV FAQs
NL1901ACV FAQs – Configure Cellular as a Backup Guide
1 of 3
FQ01119 v. 1.1 March 2019
© NetComm Wireless 2019
Configure Cellular as a Backup
Login to Web User Interface
Connect a computer and the NL1901ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your
NL1901ACV).
1 Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address
bar and press
Enter.
http://192.168.20.1
2 Enter the following credentials in the
User Name and Password fields:
User Name:
admin
Password: The serial number found on the label on the back of the device
3 Click the
Login button.
Note
– If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User
Interface guide from FAQs section.

NetComm NL1901ACV Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1900 Mbit/s
Product type	Tabletop router
Product color	Black
Networking standards	IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
4G standard	LTE-TDD & LTE-FDD
4G LTE category	8
Mobile network generation	4G
Output current	2 A
Output voltage	12 V
Power source type	AC
Memory card slot(s)	-
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 95 %
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK

Weight and Dimensions

Depth	75 mm
Width	230 mm
Height	200 mm
Weight	562 g