Netgate XG-7100-1U - Hardware Ports and Safety

To Next Page

To Previous Page

Product ManualXG-7100-1U

Also create any necessary ﬁrewall rules under Firewall -> Rules.

Now that pfSense knows of this new VLAN network, conﬁgure the switch so that ETH1-4 use the new network. To do

this, go to Interfaces -> Switches -> VLANs and click the Add Tag button. Input the VLAN tag for the new network

(same as the VLAN ID conﬁgured in the previous steps) and add ETH1-4 and PORT9-10 (uplinks) as members. Be

sure 9 and 10 are marked as tagged:

1.2. XG-7100 Switch Overview 20

Other manuals for Netgate XG-7100-1U