Need help?Do you have a question about the NETGEAR 10/100/1000 and is the answer not in the manual?
Install the switch on a flat surface without special tools, ensuring 2 inches of space for ventilation.
Attach mounting brackets to the switch sides, then secure the switch into the rack using provided screws.
Connect devices to the 10/100/1000 Mbps ports using Category 5 UTP cable and RJ-45 plugs.
Connect the DC power adapter cable to the switch's rear panel and then to a wall outlet.
Illustrations of the front and rear panels of the ProSafe JGS524F Switch.
Description of the activity and status indicated by the switch's LEDs.
Information on SFP GBIC module bays and the procedure for installing an SFP GBIC module.
Details on 10/100/1000 Mbps capable ports and the Auto Uplink™ feature.
Using the switch as a desktop solution for small network connectivity.
List of supported network standards and compatibility information.
To Next Page
General