NETGEAR A6210

Factory Default Settings and Technical Specifications
38
A6210 WiFi USB Adapter
Factory Default Settings
The following table lists the default settings of your adapter.
Table 1. Factory default settings
Default Settings
WiFi communication Enabled
Country/region United States (varies by region)
Operating mode 802.11ac, 802.11n, 802.11a, 802.11g, or 802.11b
Data rate • Up to 867 Mbps with a WiFi router or access point that supports 802.1
1ac
• Up to 300 Mbps with a WiFi router or access point that supports 802.11n
• Up to 54 Mbps with a WiFi router or access point that supports 802.11g
• Up to 11 Mbps with a WiFi router or access point that supports 802.1
1b
• Up to 54 Mbps with a WiFi router or access point that supports 802.11a