Get Started and Connect to a WiFi Network
8
A6210 WiFi USB Adapter
5. Install the adapter with or without the desktop dock:
• To install the adapter with the desktop dock, place the adapter into the dock and
connect the USB cable to a USB port on your computer.
Note: NETGEAR does not recommend that you use another cable to
connect the adapter to the USB port on your computer. Use the
desktop dock with the attached cable that is supplied in the package.
Using another USB cable might affect the performance and correct
functioning of the adapter.
Note: When the adapter is placed in the desktop dock, you can fold out
the adapter to its maximum angle for increased WiFi performance.
• T
o install the adapter without the desktop dock, insert the adapter into a USB port on
your computer.
6. Click the Next button.
The NETGEAR genie screen displays a list of WiFi networks in your area.
To Next Page
Loading...
Need help?
General
