NETGEAR BR500 Hardware Installation Guide

For Gigabit Ethernet connections, use Category 5 (Cat 5) or higher-rated Ethernet cables
terminated with RJ-45 connectors.
Key hardware features
The switch includes the following key hardware features:
•
Four Gigabit Ethernet LAN ports
•
One dedicated Gigabit Ethernet WAN (Internet) port
•
Media Access Control (MAC) address table size of 16K entries, automatic address
learning function to build the packet-forwarding information table
•
Processor speed of 1700 MHz
•
128 MB of flash memory
•
1 GB of RAM
•
Includes the following mounting hardware:
-
Four rubber footpads for tabletop installation
-
Wall-mount screw kit for wall installation
-
Rack-mount brackets and screw kit for rack-mount installation in a standard
19-inch rack
•
AutoSensing and autonegotiating capabilities for all ports
•
Auto Uplink™ technology is supported on all ports
•
Store-and-forward transmission to remove bad packets from the network
•
Active flow control to minimize packet loss and frame drops
•
Half-duplex backpressure control
•
Per-port status LEDs and system status LEDs:
- System Power LED
- System Internet LED
- Cloud Connection LED
-
VPN LED for VPN connections
- Per-port link, speed, and activity LED
•
VPNC (Basic, AES Interop), ICSA Firewall
Hardware Installation Guide6Introduction
Insight Instant VPN Router BR500

NETGEAR BR500 Specifications

General

Brand	NETGEAR
Model	BR500
Category	Network Router
Language	English