NETGEAR CG3000Dv2 User Manual

Supplemental Information
54
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the rear panel of the gateway, press
and hold the Reset button for over 7 seconds. The gateway resets and returns to the
factory configuration settings shown in the following table.
Table 2. Factory default settings
Feature Parameter Default
Gateway login User login URL http://192.168.0.1
User name and password
(case-sensitive)
admin/password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP Ending IP address 192.168.0.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address.
WAN MTU size 1500

NETGEAR CG3000Dv2 Specifications

General

Brand	NETGEAR
Model	CG3000Dv2
Category	Gateway
Language	English