Connecting to the Internet
7
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Upstream
• Blue. More than one upstream channel is locked.
• Solid. One upstream channel is locked.
• Blinking green. The unit is ranging on the upstream.
• Off. No downstream channel is locked.
Internet
• Solid green. The cable modem is online.
• Slow blink. The cable modem is receiving DHCP information.
• Fast blink. The cable modem is downloading the configuration file.
• Off. The cable modem is offline.
LAN (Ethernet)
Green indicates 1,000 Mbps. Amber indicates 100/10 Mbps.
• Solid. An Ethernet device is connected and powered on.
• Blinking. Data is being transmitted or received on the Ethernet port.
• Off. No Ethernet device is detected on the Ethernet port.
Wireless
On/Off
• Solid green. The wireless card is plugged in and enabled.
• Blinking. There is traffic on the wireless card.
• Off. The wireless card is either disabled or not plugged in.
To enable or disable the card, press this button for 3 seconds.
WPS
Pressing this button opens a 2-minute window for the gateway to connect with other
WPS-enabled devices. For more information, about using the WPS method to implement
security, see the Use Push 'N' Connect (WPS) Wireless Setup on page 15.
LED Description (continued)
To Next Page
Loading...
Need help?
General