You can use this diagram to connect your modem router to an ADSL line or a cable/fiber modem, or you can
follow the instructions in this booklet.
1. ADSL Internet
2. Computer
3. Power
4. Open browser
or cable/fiber
modem*
After power-on, wait for
the WiFi LED to turn blue.
*Note: Connect to the telephone line for ADSL Internet or to the cable/fiber modem from the Gigabit Ethernet WAN port.
If the web page does not display,
close and reopen the browser; enter
http://routerlogin.net in the address
bar. Enter the user name admin
and the password password.
Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label
of
your product and use it to register your product at
https://my.netgear.com.
You must register your product before you can use NETGEAR
telep
hone support. NETGEAR recommends registering your
product through the NETGEAR website.
For product updates and web support, visit
http://support.netgear.com.
NETGEAR recommends that you use on
ly the official NETGEAR
support resources.
You can get the user manual online at
http://downloadcenter.netgear.com or through a link in the
product’s user interface.
To Next Page
Loading...
Need help?
General
