NETGEAR D6300B User Manual

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
January 2013
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are
trademarks and/or registered trademarks of NETGEAR, Inc. and/or its
subsidiaries in the United States and/or other countries. Information is
subject to change without notice. © NETGEAR, Inc. All rights reserved.
Compliance
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Intended for indoor use only in all EU member states, EFTA states, and
Swit
zerland.
D6300B WiFi Modem Router Installation Guide
Package Contents
The box should contain the following items. If any items are
incorrect, missing, or damaged, contact your NETGEAR dealer.
GM plug to US jack adapter
The filter or splitter
provided depends
on the region.
Ethernet cable
DSL cable
D6300B Modem Router
Power adapter (2 parts)

NETGEAR D6300B Specifications

General

Wireless Standard	802.11ac
Frequency Bands	2.4 GHz and 5 GHz
Ethernet Ports	4 x 10/100/1000 Mbps
USB Ports	1 x USB 2.0
ADSL/VDSL Modem	Yes
Security	WPA/WPA2
Maximum Wireless Speed	1600 Mbps (300 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)

Summary

Package Contents

Support

Before You Begin (DSL Connection)

Install Your Modem Router

Connect the Router to Your Internet Service

Guides connection to DSL or cable/fiber internet services.

Power on Your Router

Instructions for powering on the modem router and checking the WiFi LED.

Connect a Computer

Details on connecting a computer via Ethernet cable or wirelessly.

Open a Web Browser

Steps to open a web browser and access the NETGEAR genie installation wizard.

Preset Wireless Security

Wireless Network Settings

Join the Wireless Network

WPS Method

Connects devices to WiFi using the WPS button.

Manual Method

Connects devices to WiFi by selecting network name and entering password.

Access the Router to Make Changes

NETGEAR genie App

NETGEAR genie Mobile App

ReadySHARE Access

ReadySHARE Printer

Utility to control a shared USB printer connected to the router.

Control Center Configuration

Settings for the USB Control Center utility, including auto-start and language.

USB Printer

Instructions for connecting and using a USB printer with the router.

Scan with a Multifunction Printer

Troubleshooting