20
required. A filter that is installed where it is not needed might
eliminate your ADSL signal.
3. Power down
your modem router, and then power it up again.
a. T
urn off the modem router.
b. Unp
lug the power adapter cord and all other cables from the
back of the modem router.
c. W
ait 30 seconds, then reconnect the cables and power
adapter cord to your modem router, and turn it on.
d. Make sure
that the Power LED is lit. If the LED is off, try
plugging the power adapter cord into another power outlet.
e. W
ait for the WiFi LED to turn blue.
4. Open a web browser
and try to access the Internet.
If steps 1–4 do not resolve the problem:
5. R
eset your modem router.
To reset your modem router, use a pin or paper clip to press in
a
nd hold the Reset button.
To Next Page
Loading...
