EasyManua.ls Logo

NETGEAR DG834G - 54 Mbps Wireless ADSL Firewall Router

NETGEAR DG834G - 54 Mbps Wireless ADSL Firewall Router
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
Introduction 2-7
You can use the LEDs to verify various conditions. Table 2-1 lists and describes each LED on the
front panel of the router. These LEDs are green when lit.
The Router’s Rear Panel
The rear panel of the DG834G 54 Mbps Wireless ADSL Firewall Router (Figure 2-2) contains
port connections.
Figure 2-2: DG834G Rear Panel
Viewed from left to right, the rear panel contains the following elements:
Table 2-1. LED Descriptions
Label Activity Description
Power On
Off
Power is supplied to the router.
Power is not supplied to the router.
Tes t On
Off
The system is initializing.
The system is ready and running.
Internet Blink -- Amber
On -- Green
Blink -- Green
Indicates ADSL training.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
Wireless On
Off
Indicates that the Wireless port is initialized.
The Wireless Access Point is turned off.
LAN On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
The Local port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
54 Mbps Wireless ADSL Firewall Router DG834G

Table of Contents

Related product manuals