Wireless ADSL Modem Router Setup Manual
Connecting the Router to the Internet 1-9
v1.0, October 2005
b. Connect the Ethernet cable (D) from a wireless ADSL modem router LAN port to the
Ethernet adapter in your computer.
c. Connect the power adapter to the router and plug it in to a power outlet. Verify the
following:
The power light is lit after turning on the router.
The test light comes on briefly, then goes off.
The wireless light is lit after turning on the router.
The ADSL light is green, indicating you are connected to the ADSL network.
d. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software. Cancel it if it starts automatically. Verify the following:
Figure 1-8
0HONE
!$3,
,INE
D
To Next Page
Loading...
