Wireless ADSL Modem Router Setup Manual
Connecting the Router to the Internet 1-3
v1.0, October 2005
The Router’s Rear Panel
The rear panel of the wireless ADSL modem router contains port connections.
Viewed from left to right, the rear panel contains the following elements:
1. AC power adapter outlet
2. Four Local Ethernet RJ-45 LAN ports for connecting the router to the local computers
3. RJ-11 ADSL port for connecting the router to an ADSL line
4. Factory Default Reset push button
What You Need Before You Begin
You need to prepare the following before you can set up your router:
• Active Internet service provided by an ADSL account.
• The Internet Service Provider (ISP) configuration information for your ADSL account.
• ASDL microfilters as explained below.
• Your computers set to DHCP.
Figure 1-2
1
2
4
3
To Next Page
Loading...
