11
a. Turn off the modem router.
b. Unp
lug the power adapter and all other cables from the back
of the modem router.
c. W
ait 30 seconds, then reconnect the cables and adapter to
your modem router, and turn it on.
d. Make sure
that the Power LED is lit. If the LED is off, try
plugging the power adapter into another power outlet.
e. W
ait for the LEDs to light green.
3. Open a web browser
and try to access the Internet.
If steps 1–3 do not resolve the problem:
4. Reset your mo
dem router.
To reset your modem router, use a pin or paper clip to press in
a
nd hold the Reset button (accessed through a small hole).
ReadySHARE Access
After installation and setup, insert a USB storage device into the USB
port on the modem router
to share its contents with other network
users. (If your USB device has special drivers, it is not compatible.)
If your USB device requires a power supply, use it when connecting
your USB device to the modem router. It takes up to 2 minutes before
the USB drive is ready for sharing.
For more about ReadySHARE, visit www.netgear.com/readyshare.
To Next Page
Loading...
Need help?
General
