You can use an Ethernet cable or connect wirelessly.
• F
or a wired connection, use an Ethernet cable to connect
your computer to an unused yellow Ethernet LAN port on
your modem router.
• T
o connect wirelessly, use the preset wireless security
settings on the label on the bottom of the router.
4. Lau
nch a browser.
The first time that you connect to the modem router, the genie
screen displ
ays. Follow the genie steps to connect to the Internet
If the genie screen does not display, close and reopen the
b
rowser and enter http://routerlogin.net in the address bar. See
Troubleshooting on
page 10.
Preset Wireless Security
This product has a unique WiFi network name (SSID) and network
key (password). The default SSID and password are uniquely
generated for every device, like a serial number, to protect and
maximize your wireless security. This information is on the label on
the bottom of the product.
To Next Page
Loading...
Need help?
General
