NETGEAR DGN2200v4 User Manual

5
 To connect cable/fiber modem:
Use an Ethernet cable to connect the cable
/fiber modem to the
Ethernet WAN port (labeled 4/WAN) on the rear panel of the
modem router.
2. Add
power to the modem router.
To DSL Internet
or
To cable/fiber
Internet
a. Connect the power adapter to the router, and plug the power
adapter into an outlet.
b. W
ait for the WiFi LED on the front panel to light. If no LEDs
are lit, press the Power On/Off button on the rear panel of
the modem router.

NETGEAR DGN2200v4 Specifications

General

Brand	NETGEAR
Model	DGN2200v4
Category	Wireless Router
Language	English