EasyManuals Logo

NETGEAR EX3700 User Manual

NETGEAR EX3700
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Get Started
11
AC750 WiF Range Extender
2. Within two minutes, press the WPS button on your router or access point.
The WPS LED on the extender lights solid green, the Router Link LED lights, and the
extender connects to your existing WiFi network.
If the Router Link LED does not light, try again. If it still does not light, see Connect with
Web Browser Setup on page 11.
3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender
to the 5 GHz band.
4. Find the new extender network name on your computer or WiFi device.
The extender creates two new extended WiFi networks. The extender’s new WiFi
network names are based on your existing WiFi network name, with _EXT at the end of
the name.
For example:
Existing WiFi network name. MyNetworkName
New extended network names. MyNetworkName_2GEXT and
MyNetworkName_5GEXT
5. Connect your computer or WiFi devices to the new extended WiFi network.
Use the same WiFi password that you use for your WiFi router.
6. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
7. Plug the extender into an electrical outlet.
8. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the
extender.
9. Use the Router Link LED on the front panel to help you choose a spot where the
extender-to-router connection is optimal.
Connect with Web Browser Setup
You can use a web browser to log in to the extender and set up its WiFi connection to your
existing WiFi router.
To use a web browser to connect the extender to your WiFi router:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
extender WiFi network NETGEAR_EXT.
After the connection with the computer or WiFi device is established, the Device Link LED
lights.
2. Launch web browser.
3. Enter www.mywifiext.net in the address field of the browser.

Table of Contents

Other manuals for NETGEAR EX3700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR EX3700 and is the answer not in the manual?

NETGEAR EX3700 Specifications

General IconGeneral
Type-
Maximum transfer distance- m
Windows operating systems supportedYes
Power over Ethernet (PoE)No
Product colorWhite
Antennas quantity2
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithmsWPS
Wi-Fi data rate (max)750 Mbit/s
Ethernet LAN (RJ-45) ports1
Package depth178 mm
Package width143 mm
Package height99 mm
Package weight310 g
Shipping (inner) case width390 mm
Shipping (inner) case height339 mm
Shipping (inner) case length333 mm
Shipping (inner) case net weight4550 g
Number of layers per pallet (air)4 pc(s)
Number of layers per pallet (sea)6 pc(s)
Number of cartons per pallet layer9 pc(s)
Quantity per shipping (inner) case12 pc(s)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth67.17 mm
Width55.17 mm
Height39 mm
Weight130 g

Related product manuals