NETGEAR EX6130 - Use WPS to Add a Computer to the Extenders Wifi Network

Network Settings
31
AC1200 WiFi Range Extender
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. If your browser displays the Menu icon
, click it.
The extender menu displays.
5. Select Settings > W
ireless.
6. Select or clear the Enable 20/40 MHz Coexistence (2.4GHz) check box.
7. Click the SA
VE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender’s WiFi
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS button
or enter a PIN to connect.