Get Started
17
Nighthawk X4 AC2200 WiFi Range Extender
4. Enter your user name and password and click the LOG IN button.
The Status page displays.
5. Click the SMART SETUP button.
The Welcome page displays.
6. Select your WiFi network and click the NEXT button.
7. When prompted, enter the password to connect to your WiFi network and click the NEXT
button.
A message displays when the extender connects to your existing router’s WiFi network.
8. Click the NEXT button.
The extender applies your settings to its WiFi network names and WiFi passwords.
During this change, the extender disconnects you from its WiFi network.
9. When prompted, connect your WiFi devices to the extender WiFi network and click the
CONTINUE button.
The registration page displays.
10. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
To Next Page
Loading...
