Supplemental Information
47
Nighthawk X4 AC2200 WiFi Range Extender
Factory Default Settings
The following table includes the factory settings for the extender. You can use the Factory
Reset button or the log in to the extender and reset it to these settings. (See Return the
Extender to Its Factory Settings on page 39.)
Table 2. Factory default settings
Feature Setting
Setup Wizard Enabled
Wireless communication Enabled
Wireless network names (SSIDs) • 2.4 GHz network: NETGEAR_2GEXT
• 5 GHz network: NETGEAR_5GEXT
Security Disabled
WiFi speed Auto
1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Varies by region
Operating mode 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a
Data rate Up to 450 Mbps for 2.4 GHz network and 1733 Mbps for 5 GHz network
DHCP Client enabled
Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Feature Description
Network protocol and standards
compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS
relay
, NAT (many-to-one)
Power consumption 100–240V, 50/60 Hz, 0.5A maximum
Physical specifications • Dimensions: 145 x 200 x 100 mm (5.8 x 8 x 4 in.))
• W
eight: 300 g (12 oz.)
To Next Page
Loading...
