EasyManua.ls Logo

NETGEAR GS105PE

NETGEAR GS105PE
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Guide
ProSAFE Plus 5-Port Gigabit PoE Pass Through
Switch GS105PE
Step 2. Connect power.
Step 3. Check status.
PoE pass through
enabled
Off
Power LED
Step 1. Connect equipment.
GS105PE switch
Computer Server
PoE Switch
PoE pass through
disabled
1000 Mbps activity
(blinking)
No link (off)
1000 Mbps link
Port LEDs Left
10/100 Mbps link
10/100 Mbps activity
(blinking)
PoE PD (Port 5)
LED Right
PoE PSE (Ports 1
and 2) LEDs Right
Receiving power
from PSE per 802.3at
specification
Receiving power
from PSE
Off
Supplying power
PoE Fault
No PoE Power
PD not deteced
GS105PE switch
PoE Switch
PoE PD Port PoE PSE Port
Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS105PE and is the answer not in the manual?

NETGEAR GS105PE Specifications

General IconGeneral
ModelGS105PE
CategorySwitch
Ports5
PoE Ports4
Switching Capacity10 Gbps
Form FactorDesktop
Forwarding Rate7.44 Mpps
MAC Address Table Size2K
Jumbo Frame SupportYes
VLAN SupportYes
QoSYes
ManagementWeb-based
MountingDesktop or wall mount
Operating Temperature0°C to 40°C
Humidity90% maximum relative humidity, noncondensing

Related product manuals