NETGEAR GS348 User Manual

NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
March 2017
Rack-Mount the Switch
We recommend that you use the mounting brackets and screws that came
with the switch.
1. Use a No. 2 Phillips screwdriver to attach the mounting brackets to the
side of the switch.
a. Insert the screws through a bracket and into the mounting holes in
the switch.
b. Tighten the screws to secure the mounting brackets to the switch.
2. Use a No. 1 Phillips screwdriver to attach the switch with its mounting
brackets to the rack.
a. Align the mounting holes in the brackets with the holes in the rack
and insert two pan-head screws through each bracket and into the
rack.
b. Tighten the screws to secure the mounting brackets to the rack.
Specifications
Specification Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or
1000BASE-T
Network cable Category 5e (Cat 5e) or better Ethernet cable
Gigabit Ethernet ports 48
Acoustic noise level Fanless
Jumbo frames 9216 bytes
Energy Ecient Ethernet (EEE) Yes
Auto power down Yes
Short cable detection Yes
Power consumption 100–240 VAC 50/60Hz, 1.4A maximum
Weight 6.95 lb (3.15 kg)
Dimensions (W x D x H) 17.3 in. x 8 in. x 1.7 in. (440 mm x 204 mm x 43.3 mm)
Operating temperature 32–122°F (0–50°C)
Operating humidity 0%–90% relative humidity, noncondensing
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only ocial NETGEAR support resources.
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.

NETGEAR GS348 Specifications

General

Switch type	Unmanaged
Quality of Service (QoS) support	Yes
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	-
Form factor	1U
Product color	Black
LED indicators	Activity, Link, Power
Jumbo frames	9216
Latency (1 Gbps)	4 µs
MAC address table	16000 entries
Packet forwarding rate (1 Gbps)	1448000 pps
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Power source	AC
Input current	1 A
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	23 W
Power consumption (typical)	8.81 W
Heat dissipation	7866 BTU/h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43.2 mm
Weight	3150 g