Features
The switch supports the following key hardware features:
•
8 or 16 Gigabit Ethernet ports.
•
PoE+ support on model GSS108EPP:
- 4 Gigabit Ethernet ports that support PoE+ (802.3at).
-
Total PoE power budget of 47W for the switch.
•
Switching fabric (duplex mode, all ports line-rate) as follows:
-
16 Gbps for models GSS108E and GSS108EPP.
-
32 Gbps for model GSS116E.
•
1-2-3-4 Click Mounting system, which lets you easily mount the switch vertically or
horizontally on a wall, pole, or table leg.
•
Full compatibility with IEEE standards:
- IEEE 802.3 Ethernet
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-T
- IEEE 802.3ab 1000BASE-T
-
IEEE 802.3x Full-duplex flow control
- IEEE 802.1Q VLAN tagging
-
IEEE 802.1p Class of Service (QoS)
-
IEEE 802.3az Energy Efficient Ethernet (EEE)
-
IEEE 802.1af (PoE, model GSS108EPP only)
- IEEE 802.1at (PoE+, model GSS108EPP only)
•
AutoSensing and autonegotiating capabilities for all ports.
•
Auto Uplink technology is supported on all ports.
•
Automatic address learning function to build the packet-forwarding information
table. The table contains Media Access Control (MAC) addresses as follows:
-
Up to 8K for models GSS108E and GSS116E.
-
Up to 4K for model GSS108EPP.
Hardware Installation Guide7Introduction
8-Port and 16-Port Gigabit Ethernet (PoE+) Smart Managed Plus Click Switch
To Next Page
Loading...
Need help?
General
