EasyManua.ls Logo

NETGEAR LM1300 User Manual

NETGEAR LM1300
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LTE Modem LM1300
Quick Start
Connect to the LTE network
To obtain an activated SIM card, contact your mobile
broadband service provider.
1. Ensure that power to the modem is off.
2. Align the nano SIM card with the notch toward the
nano SIM card slot and the chip side facing down.
3. Gently insert the nano SIM card into the nano SIM
card slot.
1. Connect the USB cable to the power port on the
modem and to the provided power adapter.
2. Plug the power adapter into an indoor power
outlet.
Note: We recommend connecting the USB
cable only to the power adapter that came in the
package. Connecting the USB cable to a USB port
on a computer might not work correctly.
The Power LED
lights solid amber and then
lights solid green.
The modem searches for the mobile broadband
network available from the nano SIM, which might
take several minutes.
3. Check the Signal Strength LED
.
Green: The LTE connection is good.
Amber: The LTE connection is weak. Try a
different location, such as near a window.
Red: The nano SIM card isn’t inserted correctly,
or the modem can’t automatically connect
to the LTE network (see Add and activate a
custom APN prole).
Whats in the box
You can connect a router or a computer (with an
Ethernet port) to the LM1300 LAN port. Connecting
a WiFi router lets you use WiFi to access the LTE
network from a computer or WiFi device.
1. Connect the Ethernet cable to the LM1300 LAN
port and the WAN or Internet port on your router.
The router now uses the LM1300 modem’s LTE
network as its main (primary) Internet connection.
2. For Internet access, connect your computer or
WiFi device to the router.
Rear panel
External antenna (TS9 ports)
Power
(USB Type C port)
Gigabit Ethernet ports
Nano SIM
card slot
Reset button
USB Type C
cable
Ethernet
cable
USB power adapter
LM1300
Modem
Power on your LM1300 modem
Connect the LM1300 LAN port
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
July 2021
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power
supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-
policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree,
return the device to your place of purchase within your return period.
Regulatory and Legal
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference
purposes only.
Question and Answer IconNeed help?

Do you have a question about the NETGEAR LM1300 and is the answer not in the manual?

NETGEAR LM1300 Specifications

General IconGeneral
CategoryModem
Ethernet Ports1 x Gigabit Ethernet
Device Type4G LTE Modem
LTE CategoryLTE Category 4
3G BandsB1 (2100 MHz), B5 (850 MHz), B8 (900 MHz)
Network Compatibility4G LTE, 3G
Weight0.5 lbs
4G LTE BandsB1, B3, B5, B7, B8, B20, B28, B38, B40, B41

Summary

Quick Start Guide

What's in the box

Lists the components included with the LM1300 modem, such as the modem itself, power adapter, and cables.

Connecting the LTE Network

Instructions for inserting the nano SIM card into the modem to connect to the LTE network.

Powering On the Modem

Steps to connect the power adapter and plug it in, including LED indicators for status.

LAN Port Connection

Guidance on connecting a router or computer to the LM1300's LAN port using an Ethernet cable.

WAN Failover Setup

Instructions for setting up the LM1300 as a failover internet connection for a wired modem.

Modem Management

How to log in to the LM1300 modem via a web browser to view and change settings.

Custom APN Profile

Steps to add and activate a custom APN profile if automatic connection fails.

LED Indicators

Explanation of the status and activity indicated by the Power, Ethernet, and Signal Strength LEDs.

Support Information

Where to find help and downloads on the NETGEAR support website and community forums.

Regulatory and Legal Details

Information on regulatory compliance, privacy policy, and terms and conditions for the device.

Related product manuals