Factory settings
You can return the router to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router for at least seven
seconds. The router resets and returns to the factory configuration settings shown in
the following table.
Table 3. Factory default settings
Default settingFeature
Router login
www.routerlogin.com or www.routerlogin.netUser login URL
adminUser name (case-sensitive)
passwordLogin password
(case-sensitive)
Internet connection
Use default hardware addressWAN MAC address
1500WAN MTU size
Local network (LAN)
192.168.1.1LAN IP
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
Depends on country or region where you bought the router.Time zone
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledTime adjusted for daylight
saving time
Wireless
See router labelSSID name
2.4 GHz: WPA2-PSK (AES)
5 GHz: WPA2-PSK (AES)
6 GHz: WPA3-PSK
Security
User Manual184Supplemental Information
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290
To Next Page
Loading...
