Table 3. Factory default settings (Continued)
Default settingFeature
EnabledBroadcast SSID
Auto
Note: Maximum wireless signal rate derived from IEEE Standard 802.11
a/b/g/n/ac/ax specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Transmission speed
United States in the US; otherwise, varies by regionCountry/region
2.4 GHz: Auto
5 GHz for WW: channel 44
5 GHz for North America: channel 153
6 GHz for WW: channel 37 (PSC)
6 GHz for North America: channel 37 (PSC)
RF channel
2.4 GHz: Up to 600 Mbps
5 GHz: Up to 4804 Mbps
6 GHz: Up to 1922 Mbps
Default operating mode
(with AX enabled)
Technical specifications
Table 4. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Dynamic DNS, UPnP, L2TP, SMBv1,
SMBv2, and SMBv3
Data and routing protocols
North America: 100–120V, 50/60 Hz
UK: 100–240V, 50/60 Hz
Europe: 100–240V, 50/60 Hz
Power adapter input
All regions: 12V/3.5 ADCPower adapter output
With antennas unfolded:
13.64 in. x 8.16 in. x 6.47 in. (346.5 mm x 207.9 mm x 164.3 mm)
Dimensions
With antennas folded:
11.86 in. x 8.16 in. x 3.23 in. (301.3 mm x 207.9 mm x 82 mm)
2.23 lbs (1.01 kg)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
User Manual185Supplemental Information
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290
To Next Page
Loading...
