Name: NETGEAR Nighthawk C6900
Brand: NETGEAR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Join the WiFi Network

You can either use Wi-Fi Protected Setup (WPS) or select your WiFi

network and type its password.

Join the WiFi Network Using WPS

For help with the WPS button on your WPS-enabled device, check

the instructions or online help that came with that device. Some

older equipment cannot use WPS.

¾ To join the network using WPS:

1. Press the WPS button

on the modem router for three to

ﬁve seconds.

The WPS LED on the modem router blinks green.

2. Within two minutes, on your WPS-enabled device, press its

WPS button or click its onscreen WPS button.

The WPS LED on the modem router lights solid green when the

computer or WiFi device connects to your modem router.

3. Repeat this process to add other WPS-enabled device devices.

Other manuals for NETGEAR Nighthawk C6900

Questions and Answers:

Need help?

Do you have a question about the NETGEAR Nighthawk C6900 and is the answer not in the manual?

General