4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll to the bottom of the page and clear the Enable Implicit BEAMFORMING check box.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network and must reconnect.
Manage MU-MIMO
Multiuser multiple input, multiple output (MU-MIMO) improves performance when multiple MU-MIMO-capable
WiFi clients transfer data at the same time.WiFi clients must support MU-MIMO, and they must be connected
to a 5 GHz WiFi band. This feature is disabled by default, but you can enable it.
To enable MU-MIMO:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll to the bottom of the page and select the Enable MU-MIMO check box.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network and must reconnect.
Use the Router as a WiFi Access Point Only
By default, the router functions as both a router and a WiFi access point (AP).You can set up the router to
function as an access point only and let it operate in the same local network as another router. When the
router functions as an access point only, many of its router-related features are disabled.
If you want to change the router’s function, use a wired connection to avoid being
disconnected when the new function takes effect.
Tip
Manage the Advanced WiFi Features
115
Nighthawk X6S AC3000 Tri-Band WiFi Router Model R7900P
To Next Page
Loading...
