NETGEAR orbi CBR750 - Page 3

We recommend connecting directly to the cable wall outlet. If you must share the connection,
use a 3.5dB (1 to 2) splitter.
4. Connect the power adapter.
Connect the power adapter to the cable modem router and plug the power adapter into an
electrical outlet.
The startup procedure takes about one minute. When it is complete, the Power LED lights
solid white.
5. Wait for the Online LED to light solid white.
This process might take up to 10 minutes.
Note: When the Online LED lights, your cable modem router is still not connected to the
Internet. You must activate your cable modem router with your ISP.
6. Connect your computer or mobile device to the Orbi cable modem router with WiFi or
Ethernet:
• WiFi. Use the WiFi network name (SSID) and password on the cable modem router label to
connect.
• Ethernet. Use an Ethernet cable to connect a computer to an Ethernet port on the cable
modem router. (The computer must have an Ethernet port.)
7. Launch a web browser and set up your cable modem router.
You are automatically redirected to the cable modem router web interface. If you’re not
redirected,, enter orbilogin.com or 192.168.1.1 in the address field of the web browser.
Follow the prompts. You are asked to do the following:
• Agree to the Terms and Conditions.
• Change your modem router’s admin credentials and set up security questions.
• Set up your WiFi network name and password.
8. Make sure that you can log in to the cable modem router web interface after the setup.
In a new web browser window, enter orbilogin.com or 192.168.1.1 and then enter the cable
modem router admin user name and password.
If the BASIC Home page displays, you are ready to activate your Internet service.
9. Activate your Internet service.
Collect the following information before starting to activate your internet service:
• Your ISP account information
• Cable modem router model number, which is CBR750
• Cable modem router serial number
• Cable modem router MAC address
Your cable modem router’s serial number and MAC address are on the cable modem router
label.
The following table lists contact information for ISPs that support your cable modem router.