1 Ring LED
2 Power LED
3 Downstream LED
4 Upstream LED
5 Online LED
6 Sync button (also used for WPS connection)
7 Ethernet ports
8 Coaxial cable connector
9 Reset button
10 DC power connector
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you use only official
NETGEAR support resources.
For regulatory compliance information, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Some cable devices might not be compatible with certain cable networks. Check with your cable
Internet provider to confirm that this NETGEAR cable modem router is allowed on your cable
network.
If you are experiencing trouble installing your cable modem router, contact NETGEAR at 1-866-
8748924.
Note to CATV System Installer: The Coaxial cable shield shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
To Next Page
Loading...
