The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
For the router (base) and each satellite, the ports display on the page. The ports that
are connected are outlined in blue. Unused ports are outlined in gray.
5.
In either the Base (router) or Satellite section, click an Ethernet port that is part of
the LAG.
The Unbind button displays.
6. Click the Unbind button.
The ports are unbound.
7. Click the Apply button.
Your settings are saved.
User Manual135Manage the LAN and WAN
Settings
Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30
To Next Page
Loading...
Need help?
General
