NETGEAR Orbi Pro WiFi 6 Mini router User Manual

Factory settings
This section describes the factory default setting for the Orbi Pro WiFi 6 Mini router
(model SXR30) and the Orbi Pro WiFi 6 Mini satellite (model SXS30).
You can return the Orbi Pro WiFi 6 Mini router or satellite to its factory settings. Use the
end of a paper clip or a similar object to press and hold the Reset button on the back
of the router or satellite for at least seven seconds. The router or satellite resets, and
returns to the factory settings. You can also use the router web interface (see Erase the
current configuration settings on page 154).
Factory settings for Orbi Pro WiFi 6 Mini router model
SXR30
The following table shows the factory default settings for the Orbi Pro WiFi 6 Mini router.
Table 5. Factory default settings for the router
Default SettingFeature
Router web interface login
orbilogin.comLogin URL
adminLoign user name (case-sensitive)
passwordDefault login password (case-sensitive)
Internet connection
Use default hardware addressWAN MAC address
1500WAN MTU size
AutoSensingPort speed
DisabledDMZ
GMT for WW, except NA and GR
GMT+1 for GR
GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight saving time
Local network 1 (LAN 1)
192.168.1.1LAN 1 IP
255.255.255.0LAN 1 subnet mask
User Manual191Supplemental Information
Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30

NETGEAR Orbi Pro WiFi 6 Mini router Specifications

General

Brand	NETGEAR
Model	Orbi Pro WiFi 6 Mini router
Category	Wireless Router
Language	English